Anti-slip surfacing

ANTI SLIP Flooring

Our Anti slip flooring products are designed to be a quick and cost effective solution to improve safety in hazardous areas.

Our Anti-slip flooring surface’s therefore ensure risk aversion from slip, trip and fall. So they are essential in area’s where flooring can become greesey, wet or icy.

Our Anti-slip surfaces are designed to reduce risk too your work force and reduce any injury, to your staff and any subsequent costly insurance claims.


Our products incorporate a quartz gritted surface which has good thermal shock resistance.

DDA and building regulations

Above all Pebblemagic anti slip flooring products comprehensively fulfil the requirements specified in the UK Building Regulations Act and the final stage of the Disability Discrimination Act.

Corrosion Resistance

Pebblemagic anti slip flooring products are manufactured with high quality fibreglass impregnated with isophthalic polyester or vinyl ester resins. Therefore ensuring they are suitable for use in indoor or outdoor environments, including shops care homes ,hotels ,showrooms ,industrial and commercial.

Locations we provide our services

Sunderland  Newcastle  Washington  Durham  South Shields – Nothumberland – Hartlepool – Middlesborough.

These are only but a few areas we cover in the North East.

Unsure if we cover your area then please contact us to discuss?

Tel: 07500 728247 or via the “get a quote” button below

We will always try to provide our services to you. But to keep costs down for you, our customers, we have to limit the distances and time we have to travel to carry out our work.

We will let you know as immiedietly if we are unable to carry out your work.

Anti Slip flooring
Anti Slip flooring
Anti Slip flooring


PEBBLE-COAT is an anti-slip coating which can be applied to most indoor, hard surfaces, and has been specially developed for the domestic, household market. It will be effective especially in areas subject to floor wetting, such as bathrooms, kitchens, hallways, porches, etc.

The coating dries to a gloss finish which can be buffed to a higher shine if required. A low lustre version is also available. It has the added advantage of protecting your floor from staining from a wide range of household substances and scuff marks from shoes etc. This is particularly useful for wood and laminate floors which are very susceptible to marking, so helps to keep your floor looking cleaner.

It is a surprisingly thin, water-based product, producing no offensive odour and is safe to apply in confined spaces only 20 minutes drying time means that floor downtime is minimised. It is also very economical – a little goes a long way. A minimum of 3 coats on initial application is recommended for most surfaces.

What kind of floors will PEBBLE-COAT be suitable for?

It is suitable for almost all hard surfaces, including ceramic, quarry and terrazzo tiles; stone, travertine, marble, wood, laminate, vinyl, rubber etc. Some very porous or unsealed surfaces such as softwood may require to be sealed before application.

Even more traction required?

To deal with a particularly problematic surface (e.g. an entranceway in public use subject to regular wetting), you may wish to consider adding micro-traction granules to the coating. These will give the surface a very finely textured appearance. Simply add to product pack and mix thoroughly and regularly during application

Please contact us with any questions or problems. Providing us with all the relevant information needed to allow us to advise you on the most appropriate remedy and any alternatives where applicable.


Get a free online quote! or Call

07500 728247