ANTI -SLIP FLOORING & COATINGS

 

 

 

Anti-Slip solutions

Anti-slip solutions – flooring products are designed to be a quick and cost effective solution to improve safety in hazardous areas.

With an anti-slip surface our products ensure slip, trip and fall resistance area, even in wet and greasy conditions. They are designed to reduce risk too your work force and reduce any injury, to your staff and any subsequent costly insurance claims.

Durability

All of Pebblemagic anti-slip products incorporate a quartz gritted surface which has good thermal shock resistance.

DDA and building regulations

All products comprehensively fulfil the requirements specified in the UK Building Regulations Act and the final stage of the Disability Discrimination Act.

Corrosion Resistance

Pebblemagic anti-slip products are manufactured with high quality fibreglass impregnated with isophthalic polyester or vinyl ester resins. Ensuring they are suitable for use in indoor or outdoor environments, including shops care homes ,hotels ,showrooms ,industrial and commercial.

What is PEBBLE-COAT (Anti-Slip coating)

PEBBLE-COAT is an anti-slip coating which can be applied to most indoor, hard surfaces, and has been specially developed for the domestic, household market. It will be effective especially in areas subject to floor wetting, such as bathrooms, kitchens, hallways, porches, etc.

PEBBLE-COAT dries to a gloss finish which can be buffed to a higher shine if required. A low lustre version is also available. It has the added advantage of protecting your floor from staining from a wide range of household substances and scuff marks from shoes etc. This is particularly useful for wood and laminate floors which are very susceptible to marking, so helps to keep your floor looking cleaner.

It is a surprisingly thin, water-based product, producing no offensive odour and is safe to apply in confined spaces only 20 minutes drying time means that floor downtime is minimised. It is also very economical – a little goes a long way. A minimum of 3 coats on initial application is recommended for most surfaces.

What kind of floors will PEBBLE-COAT be suitable for?

PEBBLE-COAT is suitable for almost all hard surfaces, including ceramic, quarry and terrazzo tiles; stone, travertine, marble, wood, laminate, vinyl, rubber etc. Some very porous or unsealed surfaces such as softwood may require to be sealed before application.

Even more traction required?

If you have a particularly problematic surface (e.g. an entranceway in public use subject to regular wetting), you may wish to consider adding micro-traction granules to the coating. These will give the surface a very finely textured appearance. Simply add to product pack and mix thoroughly and regularly during application

If you have a specific problem and would require advice, please contact us, giving where possible the following information to enable us to advise you on the most appropriate remedy and any alternatives where applicable.

 

Contact Us

7 + 9 =

Email: info@pebblemagic.co.uk

Contact No: 07500 728247

Write to us:

Ashley Wright (Company Director)

44 Roker Avenue,

Sunderland, Tyne and Wear,

SR6 0HX